Table of Contents Table of Contents
Previous Page  77 / 106 Next Page
Information
Show Menu
Previous Page 77 / 106 Next Page
Page Background

Product: PAINT STRIPPER

Page

4

of

7

ISSUE: 5 ISSUE DATE: 02/02/2016

SECTION 7 HANDLING AND STORAGE

Precautions for safe handling

Non-combustible product. Avoid breathing vapours. Avoid contact with skin, eyes and clothing. Wash

thoroughly after handling. Do not eat, drink or smoke in contaminated areas. Handle and open containers

with care in a well-ventilated area. Ensure that the workplace is ventilated such that the Occupational

Exposure limit is not exceeded.

Conditions for safe storage, including any incompatibilities

Store in a cool, dry, well-ventilated area. Incompatible with amines, alkali metals, nitric acid. May react on

prolonged contact with aluminium releasing gas and causing subsequent pressure build up.

SECTION 8

EXPOSURE CONTROLS AND PERSONAL PROTECTION

Exposure control measures

From National Occupational Health & Safety Commission (NOHSC) Worksafe Australia -

Methylene Chloride: 174mg/m

3

(50ppm) TWA (8hr), Carcinogen Category 3, Skin

Methanol: 262mg/m

3

(200ppm) TWA (8hr), 328mg/m

3

(250ppm) STEL

Biological monitoring

No biological limit allocated.

Engineering controls

Ensure that adequate ventilation is provided. Maintain air concentrations below recommended exposure

standards. Avoid generating and inhaling mists and vapours. Keep containers closed when not in use.

Individual protection measures

Eye and face protection:

Wear safety goggles.

Skin protection:

Use solvent resistant gloves, nitrile for longer term protection or PVC and

neoprene for incidental splashes.

Respiratory protection:

If work practices do not maintain airborne level below the exposure

standard, use appropriate respiratory protection equipment. When using

respirators, select an appropriate combination of mask and filter. Select a

filter for organic gases and vapours (boiling point > 65°C). Respirators

should comply with AS1716 or an equivalent approved by a state/territory

authority.

Thermal hazards:

Not applicable.

SECTION 9

PHYSICAL AND CHEMICAL PROPERTIES

Appearance:

Light blue viscous liquid

Odour:

Data not available

Odour threshold (ppm):

Data not available

pH:

Data not available

Melting point/freezing point (°C):

Data not available

Initial boiling point and boiling range (°C):

40 (approx.)

Flash point (°C):

Data not available

Evaporation rate (Butyl acetate = 1):

Data not available

Flammability:

Non-combustible

Upper/lower flammability or explosive limits (%):

Data not available

Vapour pressure (mmHg @ 20°C):

Data not available