Aqua-Seal Chemical MSDS

33 / 54

Product Name: OxiTreat HD™
Page: 4 of 5
This revision issued: August, 2011
MATERIAL SAFETY DATA SHEET
Issued by: Aqua-Seal STC™ Phone:+61 2 9521-4000(office hours)
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Section 9 - Physical and Chemical Properties:
Physical Description & colour : Clear liquid.
Odour: No odour.
Boiling Point: Approximately 100°C at 100kPa.
Freezing/Melting Point: Below 0°C.
Volatiles: Water component.
Vapour Pressure: 2.37 kPa at 20°C (water vapour pressure).
Vapour Density: No data.
Specific Gravity: 1.2
Water Solubility: Completely soluble in water.
pH: 1.0-2.0
Volatility: No data.
Odour Threshold: No data.
Evaporation Rate: No data.
Coeff Oil/water Distribution: No data
Autoignition temp: Does not burn.
Section 10 - Stability and Reactivity
Reactivity: Most strong acids react with inorganic and organic bases such as amines to form salts. They also react with many
metals liberating hydrogen gas. These reactions are often rapid and sometimes liberate much heat. They can also decompose
many organic materials such as esters, in a reaction called hydrolysis.
Conditions to Avoid: This product should be kept in a cool place, preferably below 30°C. Keep containers tightly closed.
Keep containers and surrounding areas well ventilated.
Incompatibilities: bases, zinc, tin, aluminium and their alloys.
Fire Decomposition: Only small quantities of decomposition products are expected from this product at temperatures
normally achieved in a fire. This will only occur after heating to dryness. Combustion forms carbon dioxide, and if incomplete,
carbon monoxide and smoke. Water is also formed. Carbon monoxide poisoning produces headache, weakness, nausea,
dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death.
Polymerisation: This product will not undergo polymerisation reactions.
Section 11 - Toxicological Information
Local Effects:
Target Organs: There is no data to hand indicating any particular target organs.
Classification of Hazardous Ingredients
Ingredient Risk Phrases
Phosphoric Acid Conc>=25%: C; R34
Section 12 - Ecological Information
Insufficient data to be sure of status. However, until diluted or neutralised it will kill all aquatic organisms it contacts due to
extreme pH.
Section 13 - Disposal Considerations
Disposal: This product may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its
intended use. If it has been contaminated, it may be possible to separate the contamination in some way. Only if neither of
these options is suitable, consider landfill.
Section 14 - Transport Information
ADG Code: 3264, CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S.
Hazchem Code: 2X
Special Provisions: 223, 274
Limited quantities: ADG 7 specifies a Limited Quantity value of 5 L for this class of product.
Dangerous Goods Class: Class 8: Corrosive Substances.
Packaging Group: III