Product Name: Polish Pro™
Page: 4 of 5
This revision issued: August, 2011
MATERIAL SAFETY DATA SHEET
Issued by: Aqua-Seal STC™
www.aqua-seal.com.auPhone:
+61 2 9521-4000
(office hours)
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Volatiles:
Nil at 100°C.
Vapour Pressure:
Nil at normal ambient temperatures.
Vapour Density:
Not applicable.
Specific Gravity:
1.65 approx
Water Solubility:
Some, but not all ingredients are soluble.
pH:
1-2
Volatility:
Nil at normal ambient temperatures.
Odour Threshold:
No data.
Evaporation Rate:
Not applicable.
Coeff Oil/water Distribution
:
No data
Viscosity:
Not applicable.
Autoignition temp:
Not applicable - does not burn.
Section 10 - Stability and Reactivity
Reactivity:
This product is unlikely to react or decompose under normal storage conditions. However, if you have any
doubts, contact the supplier for advice on shelf life properties.
Conditions to Avoid:
This product should be kept in a cool place, preferably below 30°C. Keep containers tightly closed.
Containers should be kept dry. Keep isolated from combustible materials.
Incompatibilities:
strong oxidising agents.
Fire Decomposition:
Combustion forms carbon dioxide, and if incomplete, carbon monoxide and smoke. Water is also
formed. Potassium compounds. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion,
dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death.
Polymerisation:
This product will not undergo polymerisation reactions.
Section 11 - Toxicological Information
Local Effects:
Target Organs:
There is no data to hand indicating any particular target organs.
Classification of Hazardous Ingredients
Ingredient
Risk Phrases
No ingredient mentioned in the HSIS Database is present in this product at hazardous concentrations.
Section 12 - Ecological Information
Insufficient data to be sure of status.
Section 13 - Disposal Considerations
Disposal:
This product may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its
intended use. If it has been contaminated, it may be possible to separate the contamination in some way. Only if neither of
these options is suitable, we suggest that you contact a specialist disposal company to arrange disposal. Disposal by
untrained personnel may cause a dangerous incident.
Section 14 - Transport Information
ADG Code:
2811, TOXIC SOLID, ORGANIC, N.O.S. (Contains potassium oxalate).
Hazchem Code:
2X
Special Provisions:
223, 274
Limited quantities:
ADG 7 specifies a Limited Quantity value of 5 kg for this class of product.
Dangerous Goods Class:
Class 6.1: Toxic Substances.
Packaging Group:
III
Packaging Method:
P002, IBC08, LP02
Class 6 Toxic Substances shall not be loaded in the same vehicle or packed in the same freight container with Classes 1
(Explosives), 3 (Flammable Liquids where the Flammable Liquid is nitromethane), 5.1 (Oxidising Agents where the Toxic
Substances are Fire Risk Substances), 5.2 (Organic Peroxides where the Toxic Substances are Fire Risk Substances), 8
(Corrosive Substances where the Toxic Substances are cyanides and the Corrosives are acids), Foodstuffs and foodstuff
empties. They may however be loaded in the same vehicle or packed in the same freight container with Classes, 2.1




