6
Caution: Always unplug the polisher before attempting to solve a problem or when servicing.
Troubleshooting
PROBLEM:
CAUSE:
SOLUTION:
Polisher and/or vacuum
unit not working
Power cord not firmly plugged
into power point.
Check plug is plugged in firmly and
power switch is on.
Polisher and/or vacuum unit
shuts off due to high motor
temperature.
Turn main switch off and unplug
the polisher. Conduct safety and
maintenance checks found in the
Product and Training Manual. After
30 minutes the polisher vacuum unit
should be ready for use. If not contact
the number below for your nearest
Authorised Pacvac Service Centre.
Circuit breaker or RCD has
tripped.
Check the machine is in good working
order. If OK, reset circuit breaker or
RCD. If circuit breaker or RCD trips
again contact your nearest Authorised
Pacvac Service Centre.
Vacuumunit has no/poor
suction
Dust bag full.
Remove, empty and clean dust bag.
Dust bag not installed correctly. Remove and refit dust bag making
sure the rubber edging is correctly
fitted around the canister.
Hose and/or skirt not installed
correctly.
Reconnect hose and/or skirt ensuring
firm connections.
Blockages.
Check hose and/or skirt inlets for
obstructions and clear.
Blocked filter.
Remove and clean vacuum filter.
Service Requirements
Our products are designed and built to be functional and durable. For information on use andmaintenance
please read the Product & Training Manual thoroughly.
Should you require servicing
contact your nearest authorised Pacvac Service Centre.
www.pacvac.com+61 8 9479 1444
support@pacvac.com