41 / 65
Safety Data Sheet
Product Name: SLATE FINISH
Reference No: 041201,041219
Issued: 2016-09-29
Version: 5
Page 3 of 6
6. ACCIDENTAL RELEASE MEASURES
SMALL SPILLS
Wear protective equipment to prevent skin and eye contamination. Avoid inhalation of vapours or dust. Wipe up
with absorbent (clean rag or paper towels). Collect and seal in properly labelled containers or drums for disposal.
LARGE SPILLS
Clear area of all unprotected personnel. Slippery when spilt. Avoid accidents, clean up immediately. Wear
protective equipment to prevent skin and eye contamination and the inhalation of vapours. Work up wind or
increase ventilation. Contain - prevent run off into drains and waterways. Use absorbent (soil, sand or other inert
material). Collect and seal in properly labelled containers or drums for disposal. If contamination of crops,
sewers or waterways has occurred advise local emergency services.
Dangerous Goods Initial Emergency Response Guide No:
Not applicable
7. HANDLING AND STORAGE
Handling:
Avoid eye contact and skin contact. Avoid inhalation of vapour, mist or aerosols.
Storage:
Store in a cool, dry, well-ventilated place and out of direct sunlight. Store away from foodstuffs. Store
away from incompatible materials described in Section 10. Store away from sources of heat and/or ignition.
Keep container standing upright. Keep containers closed when not in use - check regularly for leaks.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
National occupational exposure limits:
No value assigned for this specific material by Safe Work Australia.
Biological Limit Values:
As per the "National Model Regulations for the Control of Workplace Hazardous
Substances (Safe Work Australia)" the ingredients in this material do not have a Biological Limit Allocated.
National occupational exposure limits:
Natural ventilation should be adequate under normal use conditions..
Personal Protection Equipment:
SAFETY SHOES, OVERALLS, GLOVES, CHEMICAL GOGGLES.
Wear safety shoes, overalls, gloves, chemical goggles.Available information suggests that gloves made from
should be suitable for intermittent contact. However, due to variations in glove construction and local conditions,
the user should make a final assessment. Always wash hands before smoking, eating, drinking or using the
toilet. Wash contaminated clothing and other protective equipment before storing or re-using.
Hygiene measures:
Keep away from food, drink and animal feeding stuffs. When using do not eat, drink or
smoke. Wash hands prior to eating, drinking or smoking. Avoid contact with clothing. Avoid eye contact and skin
contact. Avoid inhalation of vapour, mist or aerosols. Ensure that eyewash stations and safety showers are close
to the workstation location.
9. PHYSICAL AND CHEMICAL PROPERTIES
Material Family:
Aqueous Formulation
Base Units:
Litres
Form:
Creamy Liquid
Colour:
White
Odour:
Slight Ammonia
Solubility:
Miscible in water