346 / 532
SLEDGEHAMMER
Page 3 of 6
Revision date
08.08.08
7. HANDLING & STORAGE
Handling
:
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Keep container tightly
closed. Do not breathe vapours, mist or fumes.
Conditions for safe storage
Store in a cool, dry, well-ventilated area. Keep container tightly closed when not in use.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure limit(s):
There is no exposure data for this product. The Exposure Standards for 2-
Butoxyethanol CAS No: 111-76-2; TWA: 20ppm (96.9mg/m
3
) STEL: 50ppm (242mg/m
3
).
Absorption through skin may be a significant source of exposure.
Exposure controls:
Eye protection:
Wear safety glasses.
Hand protection:
Wear impervious gloves.
Respiratory protection:
If engineering controls are not effective in controlling airborne exposure
then respiratory protective equipment should be used for protection against airborne contamination.
Reference should be made to Australian Standards AS/NZ 1715, Selection
Engineering measures:
Use only in a well ventilated area. If handling large amounts a system of
local and/or general exhaust is recommended.
9. PHYSICAL & CHEMICAL PROPERTIES
Physical state:
Liquid
Colour:
Reddish-Pink
Odour:
Sweet fruity odour
pH:
11.0 – 11.3
Boiling point/range:
100-171
o
C Water
Melting point/range:
<0
o
C Water
Flash point:
Non combustible
Lower explosion limit:
Not applicable
Upper explosion limit:
Not applicable
Vapour pressure:
Not established
Relative vapour density:
Not established
Water solubility:
Miscible with water at all proportions
Relative density:
1.01 – 1.02
Evaporation rate:
Not established
Percent volatility:
Not determined
NOTE: The physical data presented above are typical values and should not be construed as a
specification.