5
Support:
+61 8 9479 1444
www.pacvac.com
Operate Right
How to vacuum easier and faster with no back strain.
1. Stand upright, with the bent hand piece section parallel to the floor.
2. Hold the bent hand piece with one hand at a comfortable arm’s length.
3. Move forward and away from the power point.
4. Use easy underarm swinging motion when detail cleaning and short dabs when spot cleaning, always
standing upright.
5. Once the end of the power cord has been reached andwork completed, return to the power point along
the cord line and disconnect the power cord from the power point.
6. If work is not completed move to the next area, connect power cord to the nearest power point and
repeat steps 1 through 6.
7. Remove back pack by sliding the one of the straps off the shoulder, while raising the other arm/shoulder
to hold strap in place. Slowly lower the shoulder and lower the back pack to the floor, do not drop.
8. If work is completed disconnect power cord from power point then wind from the back pack towards
the end of the power cord to reduce likelihood of cable twists. In the process check for nicks, cuts,
fractures, and knots.